Main

How to Repair a Fence

There are several causes for a chain link fence’s bent top rail. These include a heavy object or falling branch. To replace the rail, use linesman’s pliers and a reciprocating saw. After cutting the bent rail, fit the new railing into the cut ends. Repeat this process until the entire fence is straight again.

Dry rot

There are several ways to prevent dry rot on your fence. The first step is to remove the damaged wood. Use a saw or banging instrument to split the rotted wood and remove any screws or nails that are embedded. Then, cover the rotted wood with a new 2 x 4 piece of wood.

Wood rot

Wood rot can damage a fence, leaving big sections of it weakened. In such cases, you can seek the services of a fencing professional. You can prevent rot by protecting the wood from the elements and applying a weatherproof stain. Moreover, you should also inspect the fence regularly and repair any water damages right away.

White rot

Wood rot can be a major problem for fences and other wooden structures. It can be caused by moisture or standing water. Plants around a fence can also cause it. You can prevent wood rot by finding the source of the moisture and fixing it. In severe cases, removing the affected wood may be necessary.

Leaning fences

If your fence has been leaning for a while, it may be time to consider repairing it. It may be as simple as pushing the fence back into position or replacing it with new posts. However, Fence Repair ┬áif you can’t manage this yourself, hiring a fencing expert will save you time and money.

Chain-link fences

Chain-link fences need repair and maintenance every few years. The bottom portion of the fence needs the most attention, as many homeowners don’t check there. This section can get rusted if it is above the ground, near plants, or has children or pets pulling on it. A good way to prevent expensive repairs is to inspect your fence after each season.

Vinyl fences

If your vinyl fence is beginning to show signs of wear, you may want to perform some repairs. First, clean the area with soapy water and a soft sponge. You can also use a garden hose to clean the area. After cleaning, sand the surface with 80-grit sandpaper. When you’re finished, wipe the area with a damp rag to remove any debris.